RESIN BOUND DRIVEWAYS IN LONDON & ESSEX

Everything begins with a phone call. Once we have spoken, we will arrange a free site survey at your property. During this visit we will assess the condition of any existing surface, take measurements and discuss the finer points of your project — preferred layout, aggregate colour, stone size, edging options and any bespoke design features you have in mind. We carry an extensive range of natural stone samples, so you will have plenty to choose from.

Not sure where to start? That is perfectly normal. Our resin driveway design service in Essex and London is there to help. We will put together a layout and specification that works with your property’s existing landscaping, architecture and practical requirements. There is no obligation at this stage and no charge for the consultation.

With the site survey complete and all the details confirmed, we will prepare a fully itemised quotation for the work. Resin bound driveway costs depend on a number of variables — the size of the area, the condition of the existing surface, your choice of aggregate and the amount of groundwork preparation required. Our quotes reflect all of this accurately. There are no hidden charges. Our background in quantity surveying means you receive a figure you can trust, broken down so you can see exactly where every pound is going.

What needs to happen at this stage depends entirely on your current set-up. If you already have a solid tarmac or concrete driveway in reasonable condition, we can often lay the resin bound surface directly on top of it as an overlay. This speeds up the project significantly and reduces cost, because there is no excavation or skip hire involved.

Where no suitable base exists — or where the new driveway will be larger than the old one — full groundwork preparation is required. We will excavate to the correct depth, lay and compact a permeable sub-base, and install any necessary edging to give the finished surface clean, defined borders. A stable, level base is critical. It is the single most important factor in ensuring a crack-free, long-lasting resin driveway.

Installation itself must take place in dry conditions — moisture interferes with the curing process. Our team combines the selected aggregate with UV stable polyurethane resin in a forced action mixer on site. The blended material is then poured onto the prepared base and hand-trowelled to a smooth, even finish at a minimum depth of 18mm for driveways. We work at a steady pace, as the resin needs to be laid within a specific window before it begins to set. Once we are satisfied with the level and finish, the surface is left to cure. You can typically walk on it within four to six hours, though we recommend keeping vehicles off for a full 24 hours.

Once the resin has fully cured, our project manager carries out a thorough final inspection. We check every edge, every transition and every square metre of surface to make sure the driveway meets both our standards and yours. We then carry out a full site clean-up so that your property is left exactly as it should be.

All of our resin bound driveway installations come with a written guarantee. We have spent years refining our methods, and we stand behind the quality of every project we deliver — whether it is a small residential pathway in Brentwood or a large commercial forecourt in central London.

Contact us on 01277 724993 to discuss your project and receive a free, no-obligation quote for your new resin bound driveway.